Victron SmartSolar 75/10 MPPT Solar Charge Controller
This regulator charges all 12V and 24V batteries (including lithium) and features in-built Bluetooth connectivity so you can monitor and adjust battery charging from your smartphone!
Using Bluetooth, you can view information such as:
Solar Gauge – Realtime power output
Battery Voltage and State
Load current being drawn by appliances
Battery Charge History Analysis
Various Settings
Ultra-fast Maximum Power Point Tracking (MPPT): Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In partial shading, the innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPPT.
Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be chosen. The load output is short-circuit proof. However, some loads (especially inverters) are best connected directly to the battery, with the inverter remote control connected to and triggered by the load output. A unique interface cable may be required for this method; please refer to the manual.
BatteryLife intelligent battery management: When a solar charge controller cannot recharge the battery to its total capacity within one day, the result is often that the battery will be continually cycled between a partially charged state and the end-of-discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The battery life algorithm will monitor the battery's charge state and, if needed, slightly increase the load disconnect level (i.e., disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly 100%. From that point onwards, the load disconnect level will be modulated so that about 100% recharge is achieved about once every week.
Other Features:
IP43-rated charger casing and resin-encapsulated electronics offer all vital components exceptional protection from the environment.
The programmable battery charge algorithm allows you to tailor the charger output to your specific requirements.
The internal temperature sensor compensates absorption and float charge voltage for the temperature to ensure optimal efficiency.
A fully discharged battery recovery function will initiate charging even if the battery has been removed to zero volts.
Optional external battery voltage and temperature sensing via Bluetooth using a Smart Battery Sense or a BMV-712 Smart Battery Monitor
Extended 5-year manufacturer warranty for added confidence
Specifications:
Rated charge current 10 A
Nominal PV power, 12 V 1a,b) 145 W
Nominal PV power, 24 V 1a,b) 290 W
Max. PV short circuit current 2) 13 A
Automatic load disconnect Yes
Max. PV open circuit voltage 75 V
Peak efficiency 98 %
Self-consumption – load on 12 V: 19 mA 24 V: 16 mA
Self-consumption – load off 12 V: 10 mA 24 V: 8 mA
Charge voltage 'absorption' 14,4 V / 28,8 V (adjustable)
Charge voltage 'float' 13,8 V / 27,6 V (adjustable)
Charge algorithm multi-stage adaptive
Low voltage load disconnect 11,1 V / 22,2 V / 44,4 V or 11,8 V / 23,6 V / 47,2 V or Battery Life algorithm
Low voltage load reconnect 13,1 V / 26,2 V / 52,4 V or 14 V / 28 V / 56 V or Battery Life algorithm.
Operating temperature -30 to +60 °C (full rated output up to 40 °C)
Download the Product Manual HERE
This regulator charges all 12V and 24V batteries (including lithium) and features in-built Bluetooth connectivity so you can monitor and adjust battery charging from your smartphone!
Using Bluetooth, you can view information such as:
Solar Gauge – Realtime power output
Battery Voltage and State
Load current being drawn by appliances
Battery Charge History Analysis
Various Settings
Ultra-fast Maximum Power Point Tracking (MPPT): Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In partial shading, the innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPPT.
Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be chosen. The load output is short-circuit proof. However, some loads (especially inverters) are best connected directly to the battery, with the inverter remote control connected to and triggered by the load output. A unique interface cable may be required for this method; please refer to the manual.
BatteryLife intelligent battery management: When a solar charge controller cannot recharge the battery to its total capacity within one day, the result is often that the battery will be continually cycled between a partially charged state and the end-of-discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The battery life algorithm will monitor the battery's charge state and, if needed, slightly increase the load disconnect level (i.e., disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly 100%. From that point onwards, the load disconnect level will be modulated so that about 100% recharge is achieved about once every week.
Other Features:
IP43-rated charger casing and resin-encapsulated electronics offer all vital components exceptional protection from the environment.
The programmable battery charge algorithm allows you to tailor the charger output to your specific requirements.
The internal temperature sensor compensates absorption and float charge voltage for the temperature to ensure optimal efficiency.
A fully discharged battery recovery function will initiate charging even if the battery has been removed to zero volts.
Optional external battery voltage and temperature sensing via Bluetooth using a Smart Battery Sense or a BMV-712 Smart Battery Monitor
Extended 5-year manufacturer warranty for added confidence
Specifications:
Rated charge current 10 A
Nominal PV power, 12 V 1a,b) 145 W
Nominal PV power, 24 V 1a,b) 290 W
Max. PV short circuit current 2) 13 A
Automatic load disconnect Yes
Max. PV open circuit voltage 75 V
Peak efficiency 98 %
Self-consumption – load on 12 V: 19 mA 24 V: 16 mA
Self-consumption – load off 12 V: 10 mA 24 V: 8 mA
Charge voltage 'absorption' 14,4 V / 28,8 V (adjustable)
Charge voltage 'float' 13,8 V / 27,6 V (adjustable)
Charge algorithm multi-stage adaptive
Low voltage load disconnect 11,1 V / 22,2 V / 44,4 V or 11,8 V / 23,6 V / 47,2 V or Battery Life algorithm
Low voltage load reconnect 13,1 V / 26,2 V / 52,4 V or 14 V / 28 V / 56 V or Battery Life algorithm.
Operating temperature -30 to +60 °C (full rated output up to 40 °C)
Download the Product Manual HERE
This regulator charges all 12V and 24V batteries (including lithium) and features in-built Bluetooth connectivity so you can monitor and adjust battery charging from your smartphone!
Using Bluetooth, you can view information such as:
Solar Gauge – Realtime power output
Battery Voltage and State
Load current being drawn by appliances
Battery Charge History Analysis
Various Settings
Ultra-fast Maximum Power Point Tracking (MPPT): Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In partial shading, the innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPPT.
Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be chosen. The load output is short-circuit proof. However, some loads (especially inverters) are best connected directly to the battery, with the inverter remote control connected to and triggered by the load output. A unique interface cable may be required for this method; please refer to the manual.
BatteryLife intelligent battery management: When a solar charge controller cannot recharge the battery to its total capacity within one day, the result is often that the battery will be continually cycled between a partially charged state and the end-of-discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The battery life algorithm will monitor the battery's charge state and, if needed, slightly increase the load disconnect level (i.e., disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly 100%. From that point onwards, the load disconnect level will be modulated so that about 100% recharge is achieved about once every week.
Other Features:
IP43-rated charger casing and resin-encapsulated electronics offer all vital components exceptional protection from the environment.
The programmable battery charge algorithm allows you to tailor the charger output to your specific requirements.
The internal temperature sensor compensates absorption and float charge voltage for the temperature to ensure optimal efficiency.
A fully discharged battery recovery function will initiate charging even if the battery has been removed to zero volts.
Optional external battery voltage and temperature sensing via Bluetooth using a Smart Battery Sense or a BMV-712 Smart Battery Monitor
Extended 5-year manufacturer warranty for added confidence
Specifications:
Rated charge current 10 A
Nominal PV power, 12 V 1a,b) 145 W
Nominal PV power, 24 V 1a,b) 290 W
Max. PV short circuit current 2) 13 A
Automatic load disconnect Yes
Max. PV open circuit voltage 75 V
Peak efficiency 98 %
Self-consumption – load on 12 V: 19 mA 24 V: 16 mA
Self-consumption – load off 12 V: 10 mA 24 V: 8 mA
Charge voltage 'absorption' 14,4 V / 28,8 V (adjustable)
Charge voltage 'float' 13,8 V / 27,6 V (adjustable)
Charge algorithm multi-stage adaptive
Low voltage load disconnect 11,1 V / 22,2 V / 44,4 V or 11,8 V / 23,6 V / 47,2 V or Battery Life algorithm
Low voltage load reconnect 13,1 V / 26,2 V / 52,4 V or 14 V / 28 V / 56 V or Battery Life algorithm.
Operating temperature -30 to +60 °C (full rated output up to 40 °C)
Download the Product Manual HERE
